The Newest Innovation For Grouting Porcelain Paving

Why did we develop Joint-It Porcelain Epoxy Grout?

Over the past few years, the paving industry has seen a HUGE rise in the popularity of porcelain paving. However, there was no new innovation in grouting products to meet this new market.

Everyone needed to use the already existing grouts for porcelain, but as they are often challenging to work with - we took matters into our own hands. A few months ago we launched Joint-It Porcelain Epoxy Grout - a new way of outdoor grouting to suit a new and evolving porcelain market. The feedback so far has blown us away and we are so delighted with how it has been received.

The main benefits we have heard so far are:

Extremely High Strength Very High Quality Finish

No Messy Clean Up Required

Longevity & Durability

Less Time Grouting

Non Staining

No-Mess Application

• COVERAGE

For Joints 1-5mm Wide

Colour: Grey

Size: 400ml

Coverage: 2.5m² based on 5mm Joint Width.

We recommend 1.5mm - 2mm Joint width which will cover approximately 6 sqm.

• Joint-It Porcelain Epoxy Grout is an innovative 2-part epoxy grout specifically designed for outdoor porcelain paving with small joints. With exceptional bonding characteristics, this product is a super strength, non-staining, NON - PERMEABLE solution to grouting porcelain.

What are the benefits of Joint-It

• Porcelain Epoxy Grout?

• Sets Rock Hard

• Exceptionally High Quality Finish

• Anti-Mildew for 10+ years

• Waterproof

• No Mess Application

• Very Long Lasting & Durable

• Colour Fast

• Simple to Apply

• Non Staining

• Not Time Sensitive

• What is the coverage of Joint-It Porcelain Epoxy Grout?

  Each unit/tube of Joint-It Porcelain

  Epoxy Grout will cover up to

  approximately 2m?. Coverage depends on the width of the joints and the size of the porcelain slab.

  If you have any leftover product within a tube, you can put the cap back on and use within 1 month on a different patio.

• Is Joint-It Porcelain Epoxy Grout pressure washer resistant?

  Yes - Joint-It Porcelain Epoxy Grout is resistant to up to 7500 PSI water pressure where application guidelines have been followed correctly.

• What is the coverage of a tub of Joint-It Anti Bonding Wax!

  Each tub of Joint-It Anti Bonding Wax will cover approximately 50m2.

• Does Joint-It Porcelain Epoxy Grout have a shiny appearance?

  In some cases the product may initially have a slightly glossy appearance, but this will tone down after a few weeks to a matte finish.

• What other uses does this product have?

  This product can be used to:

  Adhere paving slabs to a wall on a small area (as long as the area is dry).

• Can Joint-It Porcelain Epoxy Grout be used on any type of joint?

  Joint-lt Porcelain Epoxy Grout can be used only on a surface where the finishing scraper can be smoothly pulled across the top of the paving to scrape off the excess. It cannot be used on paving where the edge of the stone has a handcuff finish.

• How do I prepare the surtace before using Joint-It Porcelain Epoxy Grout?

  Ensure paving is clean and dry and that rain is not expected before you have completed Step 3 of the application.

• For more information please visit

  https://jointit.com/products/joint-it-porcelain-epoxy-grout/

For more information please call us 01825733317